×

Subscribe to our mailing list

Get a Physical Copy Mailed to You

NDA SHIPPING ON ORDERS RECEIVED BY 1PM EST 720.209.9933

12516 HUDSON WAY, THORNTON, CO 80241

Gamma Axial Seals

Gamma Seals are used in highly contaminated environments. They work in the same way as our V-Rings, but with the rigidity and contaminant protection of a metal case. These seals are well suited for use in rotary applications in which high contamination reduces the life of radial seals and bearings. This type of axial seal is designed for an application in which solid, and or solid high speed particulates are an issue in the environment. Sealing axially against the housing to protect the seal, and or bearing in critical applications. The seal consists of 2 components: An elastomer sealing element and a metal case. Fitted directly on the shaft and spins with the shaft perpendicular to the housing.

DDS Gamma seals are produced in 2 types: RE and RE1. Available for shaft diameters from 10mm to 225mm.

I.D. Range  Temperature Range  Pressure Range  Construction  Material  Known Types
10 – 225 mm  -40 to 248 *F  Nominal Zinc Plated Steel  NBR RE, RE1, RB, 9RB

 

Seal Characteristics

  • Widely used in many applications with aggressive contamination.
  • Easy to install
  • Low friction loss and minimum heat generation resulting in long service life
  • Allows for axial movement and radial misalignment.
  • Functions simultaneously as a seal and dirt exclusion barrier.
  • Operates reliably in certain applications of dry running.
  • Being able to operate at high-speeds.
  • Low demands for surface roughness, hardness and tolerance.

 


© 2023 DDSSeals. All Rights Reserved. Powered By OnlineStir     Privacy Policy | Terms of Use | FTC Disclosure
Translate »