DDS End Caps are used to seal service holes. For example, they are often used in gear boxes where the shaft does not penetrate the housing wall.
Install by press fit into the housing, as you would with any shaft seal. Rubber O.D. press-fit allowances under engineering specifications.
Stocked only in NBR sh70 material. Custom materials upon request.
The EC type for up to 7 psi, the EC-HP for up to 60 psi.
|O.D. Range||Temperature Range||Pressure Range||Construction||Material||Known Types|
|10 – 790 mm||-40 to 248 *F||7 psi to 60 psi||Rubber Covered Elastomer||NBR70||EC, EC-HP, VK, VK-HP|